Why Corrosion Inhibitors Alone Aren't Enough
In a closed circuit system, the effectiveness of corrosion inhibitors relies on their ability to fully contact all metal surfaces. However, the buildup of biofilm and other debris can severely disrupt this process. Not only does this accumulation obstruct water flow, but it also prevents corrosion inhibitors from performing optimally, which can lead to catastrophic system failures and under deposit corrosion.
The Challenge of Biofilm and Debris Removal
Cleaning out this debris from pipework can be a complex and labour-intensive task. Traditional methods often fall short in ensuring that every contaminant is effectively removed, leaving your system vulnerable to ongoing issues. This is where Multitreat SF XTRA comes into play.
Introducing Multitreat SF XTRA
Multitreat SF XTRA is an innovative solution specifically formulated to target both typical detritus and biofilm within your system. It features a powerful blend of cleaning and dispersing agents, including a bio dispersant, that lifts and mobilizes contaminants, making them easy to flush out. Fully cleaned pipework not only prevents under-deposit corrosion but also enhances heat exchange efficiency, leading to significant energy savings.
The Consequences of Ignoring Biofilm and Deposits
Over time, the presence of biofilm, scale, or general deposits can lead to significant long-term damage. Anaerobic bacteria thrive beneath these deposits, producing harmful by-products such as sulphuric acid, which can cause rapid pin holing and, ultimately, system failure. As illustrated by a recent case, a new system experienced extensive pin holing within just 5 months, necessitating a full replacement.
Protect Your System, Enhance Efficiency
Multitreat SF XTRA not only protects your system from these devastating effects but also enhances overall efficiency. For example, the use of Multitreat SF XTRA revitalized a central heating system in a large office block, restoring heat to previously non-functional radiators by clearing blockages and restoring water flow. Similarly, fan coil units in chiller systems, which are prone to biofilm and contaminant buildup, benefit significantly from treatment with Multitreat SF XTRA, ensuring they maintain optimal performance.
Simple, Effective Application
Using Multitreat SF XTRA is straightforward and efficient. It requires a dose rate of just 1%, which should be added to a system on which a side stream filtration unit is fitted and left to circulate for 48 hours. During this period, it’s recommended to change the filters to ensure maximum contaminant removal. For new projects or existing plants, consider installing a side stream filtration unit like Vexo’s X-POT, which can be easily retrofitted.
After circulating Multitreat SF XTRA for 48 hours, it is recommended that an appropriate inhibitor is added to ensure optimal corrosion protection. Our full range of closed circuit inhibitor products is compatible with Multitreat SF XTRA. Multitreat SF XTRA stays active in the system, with the polymers and biodispersant in its formulation continuously working to prevent the buildup of biofilm and deposits on pipework walls.
Invest in Long-Term Protection and Efficiency
Don’t let biofilm and debris compromise your system’s integrity. Choose Multitreat SF XTRA to safeguard your pipework, enhance efficiency, and extend the lifespan of your closed circuit system.
Contact us today on ownlabel@bvwater.co.uk or 01327 709439 to learn more about how Multitreat SF XTRA can transform your system’s performance.
